From the blackberry

Finished work

Here are some images of finished work. These are slipcast pieces fired to Cone 10 then refired to Cone 05. Hope you enjoy.

The Pouring Vessel

Finally this piece is finished. It seemed to take forever, getting it just right. I created this piece from a mold. I made the mold last week and I from sculpted clay that was surrounding foam. Which ended up being kind of a bad idea. the clay kept wanting to shrink and kept cracking. I ended up using oil based clay to fill the cracks enough to take a mold from it. Of course I had to do touch up work on the mold afterwards, but today I casted the first piece out of it. I'm happy with the results, although it kind of makes me wanting to just get a 3D printer and design work on the computer and have the printer make it solid and then take a mold of that. Maybe in the future, hopefully the near future.

Slip Casting on the Road

I found myself doing some traveling last week and was trying to figure out how to work at the same time. Because as we all know, you can't do much with clay while driving. But then I had a wonderful idea. Since I'm casting it seemed to me that it was a perfect fit. With slip casting you spend a lot of time waiting, whether its for the piece to cast, dry or the mold to dry. While on one of my ventures I decided to bring 2 buckets, one of casting slip and one for reclaim. I also brought a mold. I found the timing to be perfect. I could pull off the road to a rest stop or just the side. There I would pour the casting slip into my mold. While I waited for that to set up I would use the restroom and since the casting slip I use has a fast cast Kaolin, by the time I got back out it was time to pour out the excess slip(about 3-5 minutes). I would then let it drain while i ate something and got a drink( about 4-5 minutes). Then I would set the mold back in the van with the buckets and be on my way.
Around the time the next rest stop would come up, I would then open up the mold and place the piece in a damp box. The rest stop after that would be enough time for the mold to dry enough for another cast. I mean all in all it made my trip about an extra 20 minutes, but I also created some work and got to post on my blog for someone to read hopefully.

Still trying...

Just a quick one. This is mainly a test. Trying to blog from my new blackberry. Can't figure out the picture upload yet though. Stay tuned.

The Mono Kettle

The Mono kettle is designed to save energy and time when preparing hot beverages for single users, eliminating the possibility of pouring more water than needed by featuring a kettle with an isolated mug that can be used for both heating and drinking. Heating is done by the incorporated induction system that turns on by turning the mug to its desired heating level. After heating, the control ring will get back to the off mode. The kettle features two modes, first one is up to the boiling point for preparing tea and another is called eCO mode where water is heated up to 80 degree Celsius that is enough for preparing coffee and most other hot beverages. The mug can be safely hold right after the drink is prepared with the safest holding position indicating contours on the ceramic surface.

Holy crap Batman, its a sculpture

Ahhh.. finally stepping into the sculpture realm of ceramics. I was always skeptical of those sculptors, but have realized they are just as cray as potters. This piece is a cast from a mold I made. It is influenced by futuristic design and architecture.

New Casts

This a a manipulated cast from a one part mold I made last week. There is also a top to the mold so I can get double usage out of the form. :)

Sorry for the absence

Finally 2 weeks later I am back. I spent a week down in the Philadelphia area going to ceramic conferences celebrating my birthday and spending time with my lovely girlfriend Michelle( she is the one in my profile picture). Anyways Monday and Tuesday I attended the Pre-Conference at MC3. It had simultaneous demonstrations by Christa Assad, Ron Meyers, Ellen Shankin and Andy Brayman. Along with dialogue about the sustainability of ceramics. It was a good workshop to attend with alot of interesting discussions and views on contemporary pottery. Then Wednesday thru Friday I attended NCECA in Philadelphia. It was good to see old friends.I guess I never really achieve as much out of NCECA as I anticipate. I never really find too many lectures interesting or helpful, but the galleries always turn out great. This year was no disappointment as well. I saw a lot of great work from new artists as well as familiar ones. My favorite show was at the Art Alliance on 18th and locust. Alot of clean lined and industrialized looking work. I also got a chance to eat at a great restaurant on Broad, Osteria. Michelle and I treated ourselves to a nice dinner and we were not let down in any fashion. All in all it was a good and entertaining trip, but now back to the studio where I'm supposed to be working. New pics soon. :)

Printing Buildings?

In the world of mass production and efficiency we have another technological breakthrough that will in my mind create a new future as well as less jobs for us. This is however amazing. I can't wait to see the structures this idea will create in the future. You can read more about this at the Blueprint Magazine article.

First "successful" three part mold

Thank you goes out to the crew at Campbell Pottery fro teaching me how to do this. Hours and hours of learning form the masters and of course many of those involve me failing. but experience is the best way to learn. So here is a cup form that I am producing with quickness thanks to the mold.

Harmony

My cousin recently posted about this. So I thought I would give it a try. WOW, I could lose hours to this. Here is a quick video of what it does. I am sure you'd rather give it a test run yourself though so click HERE.

Blue Teapot

Green Bottle

Orange Olive Oil Dispenser

Red Mug

Blue PItcher

Salt & Pepper

White Bottle

Red Teapot

Red Bottle

Blue Bottle

The first pour of the new foundy at Edinboro University

Walking through the different studios has its benefits. Last Thursday sculpture students were getting ready to pour bronze for the first time in the new foundry. Exciting stuff, well that is if you are into hot molten metals, but then again who doesn't like hot things.

Yike Bike

This commercial is a little too cheesy for me, but the product is awesome. Check out more videos, images and information about the Yike Bike at their website. And no, I am not getting paid to endorse this.

Finally some work

Finally, I got some batteries for the camera. So here are some of my little buildings that are transformed into functional pottery. These pieces are drying slowly waiting to get the final clean up before the firing. Oh how I hate how long it takes for these thins to dry without cracking.

What a view

A NASA image of the debris of an exploded star, known as supernova taken from NASA's Chandra X-Ray Observatory.

Just thinking outloud...

Almost 8 years ago I first sat down at a pottery wheel and like a lot of potters, became consumed by this unique craft almost instantly. Since then I knew ceramics was for me. I have been creating functional pottery while developing what I thought was my own sense of style. I tried my hand at every piece of functional ware I could think of through those years, most of them coming as requests from friends and family. I worked on various firing techniques and researched uncountable glaze tests to better understand what was really happening to this material throughout the numerous processes. I loved all of this, and I still love all of this, but I finally came to a shocking revelation the other day. While looking at galleries online, I was impressed by the number of artists represented and even more by the quality. So many great pots which means there are a lot of great potters. This occurrence called to me. Why are we making more and more pottery? We are told that everything had been done before and we agree, yet we still continue to create what I guess would be duplicates. Have all the ideas been created? This would mean we are just adding to a pile of ceramics that is 10,000 years old.
I can't tell you how many people I hear talk about their work and how they make it for the public to use. They enjoy the connection of something they have created with the user. But today we have enough pottery in the world to last forever with the mass-produced items and the hand made objects. So in a way are we not creating these objects over and over and over, for what? We could all stop making pottery and everyone would still find that perfect bowl or mug a thousand years later. Now don’t get me wrong I love pottery and making functional objects. I just see there are a lot of great potters that make great mugs. That is a lot of competition and a lot of time to develop the skill in which they possess. So why not make something that won’t be compared to the functional objects. No matter what the mug looks like, how it is fired, or used it will always be a mug. It is stuck with that label forever. Pitchers pour and plates hold food. So why are we stuck in this idea of functionality? Why not push it to something that thrives off the concept and YOUR idea. This way the art is perceived how it was intended. Something that in theory nobody has done before. These ideas spawn into more and more debates and make me question if I really should be making functional pottery.

Amazing

Sometimes I'm just dumbfounded by the prices of art. However I am glad the galleries know how to get more and more money.
Alberto Giacometti's L'Homme Qui Marche I, recently sold for $104,327,006 from Sotheby's auction house on January 12, 2010, in London. Yes this is a new world record.

The things we do to get through our time in Edinboro...

Do we really need another?

Why do people make such a huge deal over things like this? And does it really matter, he may be a flop, who knows.